How To Hang Curtains With Command Hooks?

How to Hang Curtains With Command Hooks – The easiest way to hang curtains! No drill, no nails, and no damage to your walls.

Checkout this video:

Introduction

If you want to hang your curtains without making any holes in your walls, Command hooks are a great option. You can use them to hang all types of curtains, from light and airy sheer curtains to heavy blackout curtains. Read on for a step-by-step guide on how to hang curtains with Command hooks.

What You’ll Need

-Curtains
-Command hooks
-Measuring tape
-Pencil
-Scissors

First, measure the width of your window. Add 12 inches to that measurement to get the total width of fabric you’ll need. For example, if your window is 30 inches wide, you’ll need 42 inches of fabric.

Next, measure the height of your window from the top of the window frame to where you want the curtains to end. Curtains typically hang about 6 inches above the window and land just below the sill or about 1 inch above the floor. Add 8 inches to that measurement to get the total height of fabric you’ll need. For example, if your window is 60 inches tall, you’ll need 68 inches of fabric.
Now that you know how much fabric you need, it’s time to cut your curtains. Cut two panels that are each the width and height measurements you just took, plus an extra 1/2 inch on both sides for a seam allowance.

Measuring for Curtains

When measuring for curtains, you need to take into account the size of the window, the type of curtain rod you will be using, and the fullness of the curtains. The following steps will help you measure for curtains so that they will fit your window perfectly.

1. Measure the width of the window.
2. Decide how many inches above the window you want the curtains to start. This will be determined by the type of curtain rod you are using. For example, if you are using a rod that goes over the top of the window, you will want to measure from the top of the window to where you want the curtains to start. If you are using a rod that is mounted inside the window frame, you will want to measure from inside edge of the frame to where you want the curtains to start.
3. Add together these two measurements to get the total length of fabric you will need. For example, if your window is 30 inches wide and you want your curtains to start 8 inches above the top of your window, your total length of fabric needed would be 38 inches ((30+8)=38).
4. To determine how much fabric you need for each curtain, divide this number by 2 ((38/2)=19). This is because most curtains are made up of two panels of fabric sewn together in order save time and money when hung on a window. So for our example, each panel would need to be 19 inches wide in order for both panels together to fit our 38-inch wide window perfectly when hung on a Rod that mounts inside The frame (19x2=38).

Hanging Curtains with Command Hooks

Hanging curtains with command hooks is a simple and easily reversible way to add privacy and style to your home. Command hooks are available in a variety of sizes and styles, so you can find the perfect look for your space. Here are a few tips for hanging curtains with command hooks:

-Start by measuring the width of your window and purchasing curtains that are at least 2-3 inches wider. This will allow you to adjust the amount of light coming in and ensure that your curtains hang evenly.
-Next, use a tape measure to determine how high you want your curtains to hang. For a standard window, it is recommended that they hang about 12 inches above the window frame. If you want a more dramatic look, you can hang them higher.
-Once you have measured the width and height of your window, purchase command hooks that are rated for the weight of your curtains. Heavier curtains will require stronger hooks.
-Install the command hooks following the manufacturer’s instructions. Be sure to allow for proper clearance so that your curtains can freely open and close.
-Finally,hang your curtains on the command hooks and enjoy your new privacy!

Tips for Hanging Curtains with Command Hooks

If you’re tired of damaged walls and holes from nails, then read on for tips on how to hang curtains with Command™ damage-free hanging products. No matter what style curtain you have, we have the solution for you. Watch our how-to videos for step-by-step instructions on different types of curtains and rods.

First, select your product. For a light to medium weight curtain, use Command™ Medium Bathroom Hooks. For heavier curtains, use Command™ Large Bathroom Hooks. Be sure to check the weight capacity of the hook before use.

Next, decide on the placement of your command hook. For a standard look, place your hooks 1-2 inches above your window frame and evenly spaced apart. If you want a more modern look, try placing your hooks closer together or further apart. Experiment until you find the look you love!

Now it’s time to apply your command hook! Be sure to follow the package instructions for proper adhesive strips placement and holding time. Once your adhesive has had time to set and is secure, gently place your curtain rod onto the hooks. We recommend using two hooks per side for stability.

Finally, hang your curtains! Gather your fabric at the top of the rod and insert into the chosen ring type – clip rings work great for most fabrics! Once all fabric is through the rings, draw the curtains closed and enjoy!

How to Hang Curtains with Command Hooks Without Damaging Walls

If you’re looking for a way to hang curtains without damaging your walls, then you should definitely consider using command hooks. Command hooks are a type of adhesive hook that can be attached to any smooth, flat surface. They’re perfect for hanging curtains because they’re strong enough to hold the weight of the fabric, but they can be easily removed without leaving any damage.

Here’s a step-by-step guide on how to hang curtains with command hooks:

1. Start by measuring the width of your window. You’ll need to know this measurement so that you can purchase the correct size hooks.

2. Next, purchase command hooks that are specifically designed for holding curtains. These hooks will have a plastic sleeve that will prevent the hook from tearing through the fabric.

3. Once you have your hooks, hold one up to the top of the window and mark where you need to place it. Repeat this process for each hook that you’ll be using.

4. Now it’s time to actually attach the hooks to the wall. Be sure to follow the package instructions so that you don’t damage your walls.

5. Once the hooks are in place, drape your curtain over them and adjust it until it’s in the desired position.

And that’s all there is to it! Hanging curtains with command hooks is a quick and easy way to achieve a beautiful window treatment without damaging your walls in any way.

How to Hang Sheer Curtains with Command Hooks

There are a variety of ways to hang curtains with command hooks. The most popular way is by using the adhesive strips that are included with the hooks. These can be applied directly to the wall or to the back of the curtain rod. Another popular way is to use wire hangers. This method is more secure and prevents the curtains from falling down.

How to Hang Blackout Curtains with Command Hooks

There are a few different ways that you can hang blackout curtains with command hooks. The first method is to use the command hook to hold the rod in place. The second method is to use the command hook to hold the top of the curtain in place. The third method is to use the command hook to hold the bottom of the curtain in place.

The first method is the most popular because it is the easiest way to install blackout curtains. All you need to do is find a place on your wall where you want to hang the curtains. Then, take your black out curtain and place it over the top of the rod. Take your command hook and adhere it to the wall where you want the rod to be hung. Then, take your second command hook and adhere it to the wall at the other end of where you want your curtains to be hung. Once both command hooks are in place, simply slide your blackout curtain onto the rod and voila! Your blackout curtains are now installed!

The second method is also a popular way of installing blackout curtains with command hooks. This method requires two hooks per window – one for each side of where you’d like your curtains to be hung. Take your first blackout curtain and drape it over one side of where you want it to be hung, making sure that an equal amount of fabric hangs on each side. Once you have draped it over, take your first command hook and adhere it securely into place on one side. Do not remove the adhesive backing! Next, take your second blackout curtain and drape it over so that it meets up with the first one in the middle, creating a “sandwich” effect with both layers of fabric and adhesive backing sandwiched between them. Finally, take your second command hook and adhere it into place on this side as well, completing installation!

The third way of installing blackout curtains with command hooks uses only one hook per window; however, this method additionally requires some type of weighted object such as a screw or washer (something small that won’t damage your flooring but will provide enough weight so that gravity will keep your curtain in place). To start off, take your weighted object and tie a string around it – making sure that there is enough string length so that when held up at eye level, the weighted object hangs down below where you’d like your bottom edge of curtains to be (this will ensure proper coverage). Once you have done this, take your first blackout curtain and drape it over one side as before; however, before moving onto adhering anything into place, make sure that you have tucked the string underneath so that when everything is said and done, gravity can do its job properly! After tucking in string securely, go ahead and adhereyour single command hook into place on this side; then repeat process for other side/window!

How to Hang Curtains with Command Hooks on Windows

Assuming you have already installed the command hooks on your window frame, there are a few things you need before you can start hanging your curtains.

First, gather your supplies. You will need a measuring tape, a level, and something to mark the wall with (a pencil works well). You will also need your curtains, of course!

Next, measure the width of your window. Add an extra 6-12 inches on each side to allow for the curtain rod pockets, and mark the wall at both ends of the window. If your window is wider than 36 inches, you will want to use two sets of command hooks placed evenly across the width of the window.

Now it’s time to install the command hooks. For best results, use two command strips per hook – one strip at the top and one strip at the bottom. This will help ensure that your curtains stay in place and don’t sag in the middle.

Once the command strips are in place, carefully insert your curtain rod into the pockets. Make sure that the rod is level, and then use the marks on the wall to make sure it is even at both ends. Hang your curtains on the rod, and enjoy!

How to Hang Curtains with Command Hooks on Doors

Most people don’t realize that you can use Command hooks to hang curtains on doors. This is a great way to add a bit of privacy to your home without having to drill holes or damage door frames. You can also use Command hooks to hang curtains on windows, but this method is not as secure.

First, measure the width of your door and cut your curtains accordingly. Next, attach two Command hooks to the top of the doorframe, making sure they are level with each other. Then, loop the curtain rod through the hooks and adjust the curtains to your desired position. That’s it! You’ve now successfully hung curtains on your door without damaging the frame.

Scroll to Top