How To Measure For Curtains?

Width measurement Measure the width of your window if you want your curtains to shut and cover the full window. Add 12 inches to each side for a total of 24 inches. Divide the total number (width plus the number you added to each side) by the number of drapery panels you wish to hang in the window.

Similarly, What size curtains do I need for a 72 inch window?

Measure the width of the rod from left to right to acquire the dimensions. If your window is 72″ wide, for example, you’ll need drapes with a maximum width of 144″ (window width x 2 = 144″).

Also, it is asked, When measuring curtains what comes first length or width?

The width of the curtain is usually stated first, followed by the length. A 46′′ x 54′′ panel, for example, is 46 inches broad and 54 inches long. Don’t purchase curtains only for the purpose of covering a window.

Secondly, How do I measure my curtains to hang?

Choosing the Right Size Calculate the approximate window width. To get the overall curtain width for your window, multiply the width by two. You should get a pair with a total width that is about 20% less or larger than this dimension. From the top of the window to the floor, measure.

Also, How do you measure curtain width?

The breadth is the distance between the left and right edges. Use the window width plus 5% as the basic drapery width for drapes that just cover the window’s edge. Use drapery that is 63 inches wide for a window that is 60 inches wide. The additional 3 inches make it easier to close the curtains.

People also ask, How wide should curtains be for 70 window?

To obtain an appearance of adequate fullness, a basic guideline for displaying curtains is that the completed width of the curtains should be at least 2 times the width of your window (if not more – sheers may be 3 times the window width).

How wide should curtains be for 75 inch window?

Panels should have a total width of 2 to 212 times the width of the window to seem expansive and drapey when closed. If you’re merely hanging curtains to frame a window and don’t plan on closing them, round down to 112 times the width.

How wide should curtains be for 36 inch window?

Curtain Width Calculator Curtains should be twice the width of the window, according to Curtainshop.com, so if your window is 36 inches wide, you’ll need panels that are at least 72 inches wide. If you’re constructing your own curtains, remember to add a few inches to the sides so you can hem them.

When you buy curtains is the width per curtain?

The width that best suits the size of your track or pole should be chosen. Because you require twice the width of your track or pole in curtaining for the collected appearance, the width measurement really relates to the width of each curtain in the pair.

How much do you overlap curtains?

When hanging curtain rods, make sure they reach at least 3 or 4 inches beyond the window on each side. This enables your curtains to overlap the window and the wall, preventing light from streaming in around the corners of the window.

How many panels of curtains do I need?

To figure out how many panels you’ll need, multiply your total by the width of a single curtain panel. If you want your curtains to be firmly gathered for a rich, sumptuous effect, double the window width by 2.5 to 3. To figure out how many panels you’ll need, multiply your total by the width of a single curtain panel.

Is each curtain 168cm wide?

The most common curtain widths are 117cm (46″), 168cm (66″), and 228cm (90″). Measure the length of the rail or pole (between the finials) rather than the window to determine which one you need. This is the breadth of each curtain, so even when closed, they will have a gorgeous, full gather.

What does D mean on curtains?

Pleated heading on a pole (D. A). The distance between the finials on the pole. Drop from the pole eyelets to the length you choose.

What length should curtains be?

If you wish to use stationary panels, make sure your curtains are long enough to brush the floor softly but not so long that they gather up in a pile. A decent rule of thumb is that your curtains should break somewhere between 14 and 12 inches from the floor, comparable to a break in your trouser legs.

What is the proper placement of curtain rods?

Rods that are placed on the wall are normally four inches above the window. Mark the halfway point between the ceiling and the top of the trim at the left corner of your window to identify your perfect location.

Can curtains be a few inches off the floor?

Standard curtains are usually half-inch from the floor to midway between the window trim and the average-height ceiling. Allow the length of your curtain to be determined by the walls; in a living room, library, den, or bedroom, the longer the panels, the better.

How many curtain panels do I need for a double window?

In most circumstances, a double window will need four panels. You can get away with two panels if you want a flat or wispy effect, as long as they are big enough to cover the full window.

While curtain length varies based on the size of your window, 95-96 inches is perhaps the most typical conventional curtain length. This single size is sometimes referred as as 95 inches and other times as 96 inches.

What does 84 panel mean for curtains?

The dimensions are presented in width order. The curtain panel is 54″ wide by 84″ long. A curtain rod should be installed before picking curtains.

How long should curtains be below the window sill?

Sill Length 1/2″ higher than the window sill Comfortable and lovely. Because they are the shortest of the regular curtain lengths, they’re a great place to experiment with pattern or color. You won’t become weary of a striking decision since it takes up less visual space.

How far from the floor should curtains hang?

Free hanging curtains should be hung 12 inches above the floor. This gap enables mopping and cleaning while giving the impression that the curtain is touching the floor.

How much space should be between ceiling and curtain rod?

You should hang the rod above the window if there is room between the top of the window frame and the ceiling or crown molding. I like to hang 3 to 5 inches below the ceiling. This optically stretches the length of your wall, giving the illusion of a taller ceiling.

Can you hang curtains too high?

In this situation, a curtain that is hung too high may seem odd, particularly if there is a lot of strong light shining through the window, revealing the real window. In such instance, hang them around 8 inches above the window frame or less.

How do you make one curtain look good?

Drop Cloth for Women Curtains with one side Draw them to one side or tie them in the middle of your window with a ribbon. Hang one-sided drop cloth drapes over short and narrow windows to make them seem bigger.

Conclusion

If you’re wondering how wide your curtains should be, then you’ll want to measure the width of your window. The “how wide should curtains be for 72 inch window” is a question that many people ask.

This Video Should Help:

The “how wide should curtains be for 84 inch window” is a question that I often see on the internet. The best way to measure for curtains, is to measure the width of your window and then add 3 inches to it.

• how wide should curtains be for 36 inch window
• curtain measurements width or length first
• how wide should curtains be for 70 inch window
• youtube how to measure for curtains
• what size curtains for 180cm window
Scroll to Top